Blog

How to spot a former gasworks site in satellite imagery

A rusted, disused industrial plant with a blast furnace structure, standing amid overgrown grassland.

Gasworks sites are distinctive once you know what you're looking at. Town gas plants ran from the 1820s through the conversion to natural gas in the 1960s and 70s, and most closed without the ground ever getting properly cleared. Buildings came down, tanks got dismantled, but the footprint stays legible from above for decades if you know which marks to read.

What a gasworks leaves behind

Gas holder tanks were almost always circular or oval, and a working site often had two or three of different sizes clustered near the retort houses. When a holder is demolished the ring foundation usually stays put, showing up as a bare circle, a patch of different-coloured hardstanding, or a low embankment that never got levelled off. That's the single easiest tell: a circular or oval scar somewhere between 20 and 60 metres across, sometimes with a second or third ring nearby.

Around it you'll often find rectangular pads where the retort house and purifier house stood, a rail spur or siding running in from a former goods line (coal had to arrive somehow), and darker patches where tar, naphthalene and spent oxide waste soaked into the subsoil. That staining can persist well past a century. In multispectral imagery it tends to read as poor vegetation vigour or a dull reddish-brown tint against the surrounding ground, even where the surface looks like ordinary scrub from a plain colour pass.

Checking the shape against other evidence

A circular scar on its own isn't proof. Old sports grounds, some reservoirs and a handful of other industrial layouts are circular too. Cross-reference against a historic Ordnance Survey layer or similar archive that records the site's past use, and look for the cinder and clinker fill that's typical under a retort house apron. That fill drains differently after rain and tends to show darker or more patchy in imagery for longer than the ground around it. A circular footprint, a rail spur, and a patch of stressed or unusually uniform vegetation together are worth putting on the shortlist. None of this replaces a Phase 1 desk study or a walkover, but it narrows the field before anyone drives out.

Why gasworks ground keeps turning up on shortlists

For solar siting, former gasworks carry a particular kind of planning goodwill. They're rarely farmed, rarely redeveloped since closure because remediation costs scared off most housing and retail schemes, and a planning committee is usually glad to see a capped, screened industrial void turned into something productive instead of sitting fenced off for another decade. Gasworks remediation and solar solve two problems for a council in one application: a derelict eyesore gets dealt with, and the project earns goodwill it wouldn't get on a green field.

The catch is scale. Gasworks parcels are small by solar standards, often a few hectares, and they're scattered across a region in ones and twos rather than sitting in one obvious chain the way a landfill or quarry belt might. Finding them one record search at a time, pulling old gas board plans, chasing council archives for which ones were capped versus just left alone, can eat weeks per site before a screening decision even gets made.

That's the gap a yearly scan from high-resolution satellite imagery is built to close. Brownfield Solar Sites turns the ring scars, cinder fill patches and vegetation stress signatures above into a numbered candidate dossier covering closed landfills, spoil heaps, former quarries and visibly contaminated ground across a region, without anyone trawling historical land-use records site by site.

If gasworks parcels are part of your pipeline, it's worth seeing what a year of candidates looks like before the next screening round starts.

Request early access

← Back to the blog